manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 250

-3A    -74

TASK RESERVATION

22_2c   S201

22-2

d

1.   Press 

 “TASK RESERVATION”.

2.   Press 

 “READ”.

3.  Select [USB] or [PC] from Source window.

4.  Select pattern for reading pattern data.

5. Press 

 .

6. Press 

 or 

 . 

 The pattern will be reserved in the em-

broidery list.

 The pattern will not be reserved.  

The display go to the view of Step 7.

7. Press 

 .

Enable to read other pattern data. 

If you wish to read another design, to read 

other design from  Step 4.

8. Press 

 (Sub-mnu). 

Machine return to Task reservation menu.

Source

Task reservation menu

 Reading

This reads pattern data and writes into memory.

There are some icons (displayed in gray) which can’t be used through the function.
However, the basic operation is same as “reading” function from main menu.   5-6

Reserved pattern data

Selected or embroidering pattern

Sub-menu

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands