manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 60

-S3    -27

5-8

PREPARATION OF PATTERN DATA

5_8   W831

5-8

Search

Search pattern data or folders stored in the selected USB memory (or PC) by name.

1. Press 

 .

In this keyboard for searching, all design names 

are checked beforehand and only 

candidate alphabets will be highlighted along 

respective digits.

2.  Enter the whole or a part of the name.

To search a folder, press

 and then 

enter.

 Switches between pattern search 

                   and folder search.

 All the letters and/or numbers are 

             deleted.

 The letter is deleted before the cursor  

             position.

 Canceled.

 The search will start.

3. Press 

 .

Displayed a selection screen for the searched 

pattern or folder is displayed.

When multiple searches are performed, the 

fi

 rst 

selection screen searched from the top of the 

selection screen is displayed.

Search for 

pattern name

Search folder folder name

Cursor

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands