GSSI SIR 4000 Manual Download | Manualshive

Page: 95 / 163

background image

Geophysical Survey Systems, Inc.

SIR® 4000

Manual

MN72-433 Rev F

89

File Info:

This opens a window showing the current settings including Radar Parameters, Positioning

information, and Processing History.

StructureScan3D Playback

Quick3D Playback allows the user to display previously collected 3D data as a grid or in 2D profiles,
recollect data within a previously collected grid, and modify some settings used during the original data
collection.

Select a 3D Grid for Playback

1

Select which units were used to collect the grid, Metric or
English. Whichever units are selected will be used to
playback the grid regardless of the units used during
collection.

2

Access StructureScan3D Playback through the Introduction
Screen by selecting StructureScan3D and then Playback.
This will open a screen where you can select a grid from the
current project folder or press Choose Path to select a grid
from a previous project folder.

3

Choose the grid file you want to play back using the Control
Know and select it by pressing the Control Knob.

4

Press Enter to open the 3D grid.

5

A Loading Grid progress bar will appear on the screen to
track the progress of opening the grid.

6

The 3D grid immediately opens in the StructureSCan3D Playback Screen.

StructureScan3D Playback Options

The Playback Screen allows you to view individual 2D profiles in a grid format, rotate the grid to view
data from different angles, change colors, and do hyperbola fitting. These options are all available through
the Toolbar located at the bottom of the screen.

View Toggle

Pressing this soft key toggles the 3D Collection Screen between a top down view of the grid, askew angle
showing the 2D profiles and 3D view of the grid simultaneously, just the 2D profile, and the 2D profile
view for hyperbola fitting. You can further modify how the 3D grid appears through the Output Menu.
The display reflects the applied Rotate and Viewpoint adjustments. These options are available under the
Output Menu in the Toolbar.

«
...
93
94
95
96
97
...
»

Summary of Contents for SIR 4000




































































































































































Reviews:

No comments

Related manuals for SIR 4000

Brand: LAS Pages: 6

Brand: Lawler Pages: 4

Brand: QTP Pages: 2

Digiplex DGP-848

Brand: Paradox Pages: 20

Brand: Parkside Pages: 86

Brand: Sanhua Pages: 3

Brand: QED Pages: 26

Brand: Fingertips Lab Pages: 15

U1000 iQpump Drive

Brand: YASKAWA Pages: 426

Brand: YASKAWA Pages: 26

Brand: YASKAWA Pages: 210

Z1000 CIMR-ZU*A Series

Brand: YASKAWA Pages: 400

Z1000 CIMR-ZU*A Series

Brand: YASKAWA Pages: 466

Brand: Radionics Pages: 14

Lux Intelligent

Brand: Advanced Pages: 62

Brand: intech 21 Pages: 15

Brand: Xsens Pages: 17

Brand: Belimo Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands