Geophysical Survey Systems, Inc.
SIR® 4000
Manual
MN72-433 Rev F
122
Output Menu
This menu appears along the bottom right of the Collection
Screen while collecting data. It provides options for modifying
the appearance of your data during collection. This does not
affect raw data.
H Cursor:
Changes the depth of the slice map in the Grid Display
Window, in half inch increments. The H Cursor’s position is
displayed as a yellow horizontal line.
Slice Thickness:
Adjusts the slice thickness from zero (0) inches
to the maximum selected depth range in half inch increments. The
slice is centered on the location of the H Cursor. The time/depth
range of the slice shown as two green lines above and below the
H Cursor line.
Dielectric:
You can adjust the Dielectric Constant during data
collection from a value of one (1) to eighty-one (81).
Scale Color, Colormap, Color Stretch, and Color Slide:
Check that you are using your preferred color settings.
Rotate:
You can rotate the grid from 0-358º using the Control
Knob. The rotation changes in increments of 2º and you can start
by moving up from zero or down from 358º. Combining Rotate
with Viewpoint can create a 3D view of the data during
collection.
Viewpoint:
Viewpoint adjusts the perspective to view the grid. You can adjust the Viewpoint from -0.40
to 1, where -0.40 will provide almost a straight forward view of a 2D profile as you would see during 2D
data collection. This will not preview through the Output menu unless Viewpoint Toggle was selected
from the Toolbar.
Home:
Resets Rotate and Viewpoint to zero (0).
Summary of Contents for SIR 4000
