GSSI SIR 4000, Manual

Page: 106 / 163

Geophysical Survey Systems, Inc. SIR® 4000
Manual
MN72-433 Rev F 100
Output Menu: 350HS
1
Select
Datapath
:
Choose previously-created
datapath or create a new datapath.
2
Scale and Units
:
Verify that you are using the
appropriate vertical scale, vertical units, and
horizontal units.
3
Scale Color, Colormap, Color Stretch, and
Color Slide:
Check that you are using your
preferred color scale settings.
4
Show O-Scope:
Toggles the O-Scope display
On or Off for use during data collection.
Selecting Off will not turn off the O-Scope
display in the Setup Screen.
5
Show Hyperbola:
Toggles a hyperbola On or
Off while in setup or during collection. The
hyperbola appears at the intersection of the
vertical and horizontal cursor. By default the
horizontal cursor is placed at the top of the data
display. Toggle Show Hyperbola On or Off by
pressing the Control Knob or the Enter key.
Output Menu: 300/800DF
1
Select Datapath
:
Choose previously-created
datapath or create a new datapath.
2
Scale and Units
:
Verify that you are using the
appropriate vertical scale, vertical units, and
horizontal units.
3
Scale Color, Colormap, Color Stretch, and
Color Slide:
Check that you are using your
preferred color scale settings.
4
Show O-Scope:
Toggles the O-Scope display
On or Off for use during data collection.
Selecting Off will not turn off the O-Scope
display in the Setup Screen. Toggle Show O-
Scope On or Off by pressing the Control Knob
or the Enter key.
5
DF Display Type:
Depending on your last
used display settings you will see either 1) Line
Scan view with scrolling data, or 2) Wiggle
mode showing O-Scopes for High Freq(uency),
Low Freq(uency), or Blend. The High Freq
O-Scope is displaying the 800MHz trace, the