GSK GSK983Ma, User Manual

Page: 198 / 373

GSK983Ma Milling Machine Center CNC System User Manual
186
Part 1 Programming
Setting M99; program returns from the original program. The sequence number of the original
program returned to may be set with address P.
(Note 1): Refer to Appendix 11 for the details of the functions of macro.
(Note 2): Make sure to refer to the operation manual supplied by the manufacture of the machine when
using this function.
3.11 Tool Life Management
Tools are divided into serial groups. Specific tool life (in time or number of cycles) is specified for
each group. The so-called tool life management function refers to the capability of totalizing the tool
life of all groups in service and replacing a tool in the predetermined order in the same group.
Note: Tool life management function supports the corresponding system function.
3.11.1 Setting of the Tool Groups
The order of the tools in each group and the life of each tool are preset in the NC device in the
following format.
Format Meaning
O □□□□
G 1 0 L 3
P
□□□ L ΔΔΔ
T ΔΔΔΔ H O O D □□
T ΔΔΔΔ H O O D □□
┆
T ΔΔΔΔ H O O D □□
；
P □□□ L ΔΔΔ ；
T ΔΔΔΔ H O O D □□
；
┆
G11 ；
M02(M30)
；
Program number
To set the beginning of the tool groups
The group number of the N01~128 is
followed with the P
The tool life of the 1
～
9999 is followed with
the L. (Note 1)
（
1
）
T closes to the tool number
（
2
）
H closes the tool length offset number
D closes to the tool compensation
number
(N) Tool sequence selection (1), (2) till to
the (N)
The data of the next group
Tool group setting ends
End-of-program