Chapter One General
1
Part 1 Programming
Programming
Chapter One General
1.1 General
GSK983Ma Milling machining center CNC system (The following are abbreviated to
“System”)
, which is a medium and high grade manufactured goods with high speed, high accuracy,
high stability, and high cost performance. It has been developed base on the stable and reliable and
the market requirement and the updated technical development by the GSK CNC Equipment
Company.
This horizontal type/vertical type installation of this system adopts the 8.4
inch/10.4 inch HR, hi-lite LCD screen separately. The system uses the full paster
automatic product technology and built-in PLC.
The operating interpolation is
distributed processing by the multiply high-speed microprocessors, which owns the
treatment capacity for 500 blocks per second. The special hardware circuit is externally
connected the raster rule, which can be controlled of the position full-close. It has the
boundary CNC alarm detecting function, which is used for the serial high-speed, high
accuracy, Hi-Rel.
1.2 Cautions for Reading this Manual
The capacity of the CNC machine are determined by the CNC system, machine
structure, strong current control and the servo system (the mechanical operation pane
included), this manual is only described for the
GSK983Ma
CNC system.
This manual is introduced the function (Selection function included) of the system
with detailed, but the actual device is not included all the selection function. The function
of the CNC system is not only determined by the NC, but also the mechanical part, the
strong circuit of the machine side, servo system and the machine operator panel. It is
very hard to describe the whole functions of the system, programming and operation
thoroughly; it is only expressed from the angle of the system.
Summary of Contents for GSK983Ma
