GSK GSK983Ma, User Manual

Page: 19 / 373

Chapter two Specification
7
Part 1 Programming
47 Ambient condition
(1) Ambient temperature
Work temperature: 0
℃ ～
45
℃
Storage and transportation temperature: -20
℃ ～
55
℃
(2) Relative humidity
≤ 90% (condensing), ≤ 95% (40 )
℃
(3) Vibration
Work vibration<0.5G,
Storage and transportation vibration<1G
(4) Ambient temperature
When the NC device is used at the high concentration
circumstances, such as in the dust, cutting oil or the organic solvent, is
important to touch the manufacturer.
48
Self-diagnosis
function
(1) Servo system
a. When the error of error register is more than the setting value of
stop state, the alarm issues.
b. When the value of error register is more than the maximum
setting value, the alarm issues.
c. When the position check system is abnormal, the alarm issues.
d. When the drifting voltage is excessive large, the alarm issues.
e. When the speed control unit is abnormal, the alarm issues.
(2) NC
a. When the memory is abnormal, the alarm occurs.
b. When ROM or RAM is abnormal, the alarm occurs.
c. When the MPU is abnormal, the alarm occurs.
(3) State display
a. Display the NC state on LCD.
b. Display I/O state on LCD.
49
S function/T
function (BCD
2-digit)
2-digit command is followed with address S and T, the code signal of
BCD2-digit can be sent out once the command is performed, the S or T
code is separately sent out with other codes till to the following S or T is
specified.
50
S4-digit (Binary
system 12-digit
output) A/S4 digit
(analog output) A
The binary system 12-digit corresponding with the spindle speed or the
analog voltage outputs to the machine side, the maximum analog
voltage is ±10V, 2mA. The spindle speed (r/min) is directly specified by
S4, the spindle speed can be modified within the 50%, 60%, 70%, 80%,
90%, 100%, 110% or 120% based on the contact signal of the machine
side.
51 S4-digit (Binary When the spindle speed (r/min) is directly specified by S4-digit, output