GSK GSK983Ma, User Manual

Page: 336 / 373

GSK983Ma Milling Machine Center CNC System User Manual
324
Appendi
x
3 3 0
3 3 1
3 3 2
。
UMGCD0
．
1……9 set the G codes that call macro programs (maximum number 10)
Setting value: 001
～
255
（
G00 cannot used to call macro program
）
3 3 3
AOVMDR sets the minimum reduction ratio of the cutting feedrate in the circular inner side.
Range : 1 ～ 100% Standard setting value : 1
3 3 4
AOVOR sets the reduction ratio of automatic tuning in corner inner side.
Range : 1
～
100% Standard setting value: 50%
Set the tuning value for corner inner side.
3 3 5
AOVTH the acceptance value of inner side angle during automatic tuning
Range :1
～ 179° Standard setting value: 91°
3 3 6
3 3 7
3 3 8
3 3 9
4 1 7
POSTN X, POSTN Y, POSTN Z, POSTN 4, POSTN 5 respectively set the approaching amount of
the negative direction positioning on X, Y, Z, 4th, 5th axes
Setting value: 0
～
255 unit: 0.01mm (metric output)
0
～
255 unit: 0.001 inch (inch output)
3 4 0
IDVICE selects the input device when programs are stored (it can also be selected through the
INPUT DEVICE 2 in the “SETTING” screen; when 1 is selected, the RS232 interface is
enabled.)
Standard setting: 2 (RS232 is enabled)
3 4 1
ODVICE selects the output device for outputting the data
Standard setting: 2 (RS232 interface is enabled)
Setting
Value
Input /Output Device
2 RS232 interface is for both input and output device;
UMGCD7
G code that calls macro program O9017
UMGCD8
G code that calls macro program O9018
UMGCD9
G code that calls macro program O9019
AOVMDR
AOVOR
AOVTR
POSTNX
POSTNY
POSTNZ
POSTN4
POSTN5
IDVICE
ODVICE