GSK GSK983Ma, User Manual

Page: 35 / 373

Chapter Three Programming
23
Part 1 Programming
following groups can be adopted.
Input/output
The least input
increment
The least
movement unit
Input in mm, output in mm 0.001mm 0.001mm
Input in inch, output in mm 0.0001inch 0.001mm
Input in mm, output in inch 0.001mm
0.0001inch
Linear
axis
Input in inch, output in
inch
0.0001inch
0.0001inch
Rotation axis 0.001° 0.001°
Note: The increment system of rotation axis can not be converted in inch/metric system.
Whether the least movement unit is based on 0.001mm or 0.0001 inch which is determined by
the machine and it can be selected by the presetting BIT0 (SCW) of parameter 006.
The least input increment is 0.001mm or 0.0001inch can be selected by the G code or the
parameter setting of MDI & LCD panel.
G20 the least input increment of linear axis is 0.0001inch.
G21 the least input increment of linear axis is 0.001mm.
The G20 or G21 is unchangeable when the system is ON or OFF.
3.3.2.2 10 folds input unit
The least input increment in mm can be changed into 0.01mm using the BIT 1 of parameter 006,
which the unit in inch can not be changed.
The least input increment
Address
Input in mm Input in inch
Dimension
word
X
、
Y
、
Z
、
Q
、
R
、
I
、
J
、
K
、
U
、
V
、
W
0.01mm
0.0001inch
Rotary
axis
A
、
B
、
C
0.01° 0.01°
X
0.01s 0.001s
Dwell time
P
0.01s 0.001s
It can not be changed in the following cases:
a) When the input is different from the above-mentioned dimension word.
b) Display unit
c) The maximum command value range.
d) Increment feed unit and manual feed unit
e) Offset input
f) Others