GSK GSK983Ma, User Manual

Page: 223 / 373

Chapter Four Operation
211
Part 2
Operation
Copy key is used to load data
；
Refresh key is used to refresh contents on the screen. Usually, screen refresh is needed to update
the contents when plug in or pull out U disk.
Return key. Generally, there is no return key in the system for user to return the list of higher level on
expanded menu.
4.3.6.3.2.3 Output machining program from program memory to U disk by USB interface
Take USB interface as output unit, set parameter N0341 to 0;
Steps
： 1 ） The same as the way of program input, switch the page to U disk operation page, and
enter U disk operation items
；
2
）
When the yellow cusor is moved to the position “Copy PRO. (NcRam->UsbDisk) in
edit mode”, press key to display file list of machining program in U disk.
In Edit mode, key in program Number to be input, for example: program O0002,
that is, key in 2, and then press key, program O0002 is input to U disk.