GRAUPNER mx-16 HOTT, Programming Manual

Page: 142 / 180

142 Program description: Info display
Info Display
Date, time, transmitter ID and memory card
Use the arrow buttons of the left or right-hand touch-key
to leaf through to the “Info” menu point of the multi-
function menu:
ser vo set.
D/R expo
wing mixer contr set.
phase trim
free mixer
ser vo disp basic sett
fail-safe telemetr y
teach/pupi info disp
ser vo set.
D/R expo
free mixer contr set.
heli mixer
swashp.mix
ser vo disp basic sett
fail-safe telemetr y
teach/pupi info disp
Touch the central SET button of the right-hand touch-key
to open the menu point:
RFID
fir mware ver.
date
time
SD-CARD
available
(FRI)
1.11
0KB
0%
ABCDEF12
2011/03/11
11:22:33s
0KB
This menu displays transmitter-specifi c information,
some of which can be altered where necessary and
sensible.
Use the arrow buttons
cd
of the left or right-hand
touch-key to select the appropriate line, then touch the
central
SET button of the right-hand touch-key. In the
highlighted value fi eld you can now alter the default
value using the arrow buttons of the right-hand touch-
key, and conclude your input with a further touch of the
central
SET key.
RFID
RFID
fir mware ver.
date
time
SD-CARD
(FRI)
1.11
0KB
ABCDEF12
2011/03/11
11:22:33s
This line displays the transmitter’s identifi cation number.
This number is specifi c to the transmitter, and is only
issued once for each transmitter. During the binding
process this ID is transmitted to the receiver (amongst
other data), so that it is able at any time to identify the
radio signals of “its” transmitter.
Version
RFID
fir mware ver.
date
time
SD-CARD
(FRI)
1.11
0KB
ABCDEF12
2011/03/11
11:22:33s
This line displays the version number of the transmitter
software currently installed.
By comparing the number shown here with the update
version available for the same product on the Internet
at www.graupner.de you can judge whether an update
to the transmitter’s operating system is necessary and
useful.
In some circumstances our Service department may
also ask you for the version number.
Date
RFID
fir mware ver.
date
time
SD-CARD
(FRI)
1.11
0KB
ABCDEF12
2011/03/11
11:22:33s
If necessary, select this line using the arrow buttons ** of
the left or right-hand touch-key, then select the month or
day fi eld. A brief press of the central
SET button of the
right-hand touch-key activates the corresponding value
fi eld, and you can then set the year, month or day using
the arrow buttons of the right-hand touch-key. A further
brief press of the central
SET button of the right-hand
touch-key concludes the input process. The available
range of years runs from 2000 to 2135.
The weekday, shown in brackets at far right in abbrevi-
ated form, is automatically generated from the date.
Notes:
The date and time of day can also be set using the •
PC program available for the corresponding product
on the Internet at www.graupner.de; this requires that
the transmitter should be connected to a PC in the
appropriate manner.
The date and time are protected from data loss due
•
to power failure - for example, when the battery is
swapped - by a user-replaceable buffer battery.