GRAUPNER mx-16 HOTT, Programming Manual

Page: 75 / 180

75 Program description: transmitter control settings - fi xed-wing model
will fi nd in the “ Transmitter control settings ” menu as
“Control 9” and “Control 10”, provide a centre position in
addition to the two end-points.
Simultaneously pressing the
cd
or
ef
buttons of the
right-hand touch-key ( CLEAR ) with the switch assign-
ment activated - see illustration above - resets the input
to “free”.
Tips:
When assigning the switches please take care to set •
them to the appropriate direction of travel, and en-
sure that all inputs not required are left at or set to
“free”, to eliminate the possibility of errors if unused
transmitter controls are operated accidentally.
You can alter the effective end-points of an assigned
•
switch by adjusting servo travel, as described in the
next section.
The screen now displays either the transmitter control
number or the switch number, followed by a switch sym-
bol which indicates the direction of operation, e. g.:
I5
I6
I7
+
tr v
I8
ctrl 7
free
free
3 +100% +100%
+100%
+100% +100%
+100% +100%
+100%
Column 3 “-”
In this column the transmitter control can be adjusted
symmetrically or asymmetrically, i. e. different to either
side. The available range is +/-125% of the normal servo
travel.
Use the arrow buttons
cd
of the left or right-hand
touch-key to select one of the inputs 5 to 8.
If you wish to set up
symmetrical travel, i. e. the same in
both directions, move the associated transmitter control
(rotary proportional controls CTRL 6 … 8 or switches
4/5 and 6/7) to a position at which the marking frame
encloses both sides of the travel setting:
I5
I6
I7
+
tr v
3
I8
ctrl 7
free
free
+100% +100%
+100% +100%
+100% +100%
+100% +100%
If you wish to set up asymmetrical travel, i. e. different for
both directions, move the associated transmitter control
(rotary proportional control or switch) to a position at
which the marking frame encloses the side of the travel
setting you wish to change:
I5
I6
I7
+
tr v
I8
ctrl 7
free
free
3 +100% +100%
+100% +100%
+100% +100%
+100% +100%
Touch the central SET button of the right-hand touch-key
to activate the value setting; the value fi eld is now shown
highlighted. Use the arrow buttons of the right-hand
touch-key to alter the values:
I5
I6
I7
+
tr v
I8
ctrl 7
free
free +111% +111%
3 +100% +100%
+100% +100%
+100% +100%
I5
I6
I7
+
tr v
+100% +100%
+100% +100%
I8 +100% +100%
ctrl 7
free
free +88% +111%
3
Touch the central SET button of the right-hand touch-key
to conclude the input process.
Negative and positive parameter values are possible;
this enables you to set the appropriate direction of
movement of the transmitter control or its direction of
effect to suit your model.
Simultaneously pressing the arrow buttons
cd
or
ef
of the right-hand touch-key ( CLEAR ) resets the altered
parameter in the highlighted input fi eld to +100%.
Important:
In contrast to servo travel adjustments, changing the
transmitter travel setting affects all mixer and coupling
inputs derived from it, i. e. in the fi nal analysis all the
servos which can be operated using the associated
transmitter control.