GRAUPNER mx-16 HOTT, Programming Manual

Page: 56 / 180

56 Program description: base settings - fi xed-wing model
Base settings
Basic model-specifi c settings for fi xed-wing model aircraft
Before you start programming specifi c parameters,
some basic settings must be entered which apply only
to the currently active model memory. Select the “
Basic
settings ” (basic model settings) menu using the arrow
buttons of the left or right-hand touch-key, then touch the
central
SET button of the right-hand touch-key:
mod.mem.
ser vo set.
D/R expo
wing mixer base sett.
contr set.
phase trim
free mixer
ser vo disp basic sett
fail-safe telemetr y
model name
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type nor mal
Touch the SET button of the right-hand touch-key to
move to the next screen page, where you can select
characters to assemble the model name. You can enter
up to nine characters to defi ne a model name:
0123456789
PQRSTUVWXYZ
model name
?
: ;
A B CDEFGHIJKLMNO
GRAU B
Use the arrow buttons of the left-hand touch-key to se-
lect the desired character, then move to the next position
in the name by touching one of the arrow buttons
ef
of the right-hand touch-key, or its central SET button.
Simultaneously pressing the
cd
or
ef
buttons of the
right-hand touch-key ( CLEAR ) inserts a space at that
point.
You can move to any character position within the input
fi eld using the
ef
buttons of the right-hand touch-key.
Touching the central ESC button of the left-hand touch-
key returns you to the previous menu page.
The model name entered in this way appears in the
basic display, and also in the sub-menus of the “
Model
memory ” menu.
stick mode
“ MODE 2 ” (Throttle at left stick)
“MODE 3” (Throttle at right stick) “MODE 4” (Throttle at left stick)
“MODE 1” (Throttle at right stick)
elev. down
elev. up
left r
udder
right r
udder
full throttle
idle
left aileron
right aileron
full throttle
left r
udder
right r
udder
idle
elev. down
elev. up
left aileron
right aileron
elev. down
elev. up
left aileron
right aileron
Motor Vollgas
idle
left r
udder
right r
udder
full throttle
idle
left aileron
right aileron
elev. down
elev. up
left r
udder
right r
udder
Basically there are four possible ways of arranging the
principal control functions of a fi xed-wing model on the
two dual-axis sticks: the primary functions are aileron,
elevator, rudder and throttle (or airbrakes). Which of
these options you select depends on your individual
preferences and fl ying style.
Use the arrow buttons
cd
of the left or right-hand
touch-key to move to the “ Stick mode ” line. You will see
the Select fi eld framed:
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type nor mal
GRAUBELE
Briefl y press the SET button to highlight the current stick
mode (black background). Now use the arrow buttons
of the right-hand touch-key to select one of the options
1 to 4.
Simultaneously pressing the
cd
buttons or the
ef
buttons of the right-hand touch-key ( CLEAR ) returns the
display to stick mode “1”.
Touching the
SET button again disables the select fi eld
once more, so that you can switch lines.
motor at C1
mod name
stick mode
CH8 delay
motor at C1
1
yes
no
tail type nor mal
GRAUBELE
When you select “motor at C1” using the arrow buttons
cd
of the left or right-hand touch-key, you will see the
corresponding input fi eld framed. Touch the central SET
button of the right-hand touch-key to highlight the cur-
rent setting. Now use the arrow buttons of the right-hand
touch-key to switch between the four possible options:
“idle fr.”:
The idle position of the throttle / airbrake
stick (C1) is forward, i. e. away from the pilot.