12
Description of radio control set
specifi c programming and set-up parameters
Seven switches (two three-way switches, three two-
•
way switches and two momentary switches), plus
three digital controls - already installed and extremely
versatile
Unrestricted assignment of all switches to switched
•
functions simply by operating the appropriate switch
Internal real-time clock for dating log fi les
•
User-replaceable CR2032 buffer battery for internal
•
real-time clock
Storage of model memories using the latest battery-
•
free back-up system
Eight control functions with simplifi ed, very conven-
•
ient assignment of transmitter controls for auxiliary
functions, such as switches and proportional controls
Convenient mode selector provides simple method
•
of changing the stick mode (modes 1 - 4, e. g. throttle
right / throttle left).
When you change modes, all the affected settings
are switched at the same time.
Graphical servo display provides a straightforward
•
overview of the servo set-up, and a swift method of
checking servo travels
Receiver output swap
•
Comprehensive programs for fi xed-wing model
•
aircraft and helicopters:
Fixed-wing menu for: 1 AIL, 2 AIL, 2 AIL + 2 FLAP, V-
tail, delta / fl ying wing, two elevator servos
Fixed-wing mixer: diff aile, diff.fl aps, ail
¼
rudd, ail
¼
fl aps, brake
¼
elev, brake
¼
fl ap, brake
¼
aile,
elev
¼
fl ap, elev
¼
aile, fl ap
¼
elev, fl ap
¼
aile
and diff. reduction
Heli menu: 1-point, 2-point, 3-point and 4-point
•
linkages (1 servo, 2 servo, 3sv(2roll), 3sv(140°),
3sv(2nick (pitch-axis)), 4 SV (90°))
Swashplate limiter
•
Servo travel adju/- 150% for all servo out-
•
puts, variable separately for each side (Single Side
Servo Throw)
Variable sub-trim, range +/- 125%, for adjusting the
•
neutral position of all servos
Servo reverse, programmable for all servos
•
EXPO / DUAL-RATE system, separately variable, can
•
be switched in-fl ight, fl ight phase programmable
Stopwatch / count-down timer with alarm function
•
Model memory copy function
•
Integral DSC socket for use with fl ight simulators and
•
Trainer systems
General features of the HoTT system
Simple, ultra-fast binding of transmitter and receiver
•
Multiple receivers can be bound per model for paral-
•
lel operation
Extremely fast re-binding, even at maximum range
•
Two-receiver satellite operation using special cable
•
connection
Range-check and warning function
•
Receiver low-voltage warning on transmitter screen
•
Ultra-wide receiver operating voltage range: 3.6 V to
•
8.4 V (fully operational down to 2.5 V)
Fail-Safe
•
Unrestricted channel assignment (channel-mapping),
•
mixer functions and all servo settings programmable
in the Telemetry menu
Up to four servos can be actuated simultaneously
•
as a block, with a servo cycle time of 10 ms (digital
servos only)
Optimised frequency hopping and broad channel
•
spread for maximum interference rejection
Intelligent data transmission with corrective function
•
Real-time telemetry analysis
•
More than 200 systems can be operated simultane-
•
ously
Future-proof update capability using USB port
•
mx-16
Computer System
Eight-channel radio control set with
Graupner
HoTT 2.4 GHz technology (
Ho
pping
T
elemetry
T
ransmission)
Summary of Contents for mx-16 HOTT
