GRAUPNER mx-16 HOTT, Programming Manual

Page: 87 / 180

87 Program description: Phase trim – fi xed-wing model
P H A S E T R I M
nor mal
¿
0% 0% 0%
takeoff
speed
ther mal 0% 0% 0%
0% 0% 0%
0% 0% 0%
AIL ELE FLA
Select the desired control surface function using the
arrow buttons
ef
of the left or right-hand touch-key,
then briefl y press the central SET button of the right-
hand touch-key. The trim values in the highlighted value
fi eld can now be adjusted using the arrow-buttons of the
right-hand touch-key.
You can activate each phase by operating the assigned
phase select switch or switches. Note that the servos
do not change from one setting to another abruptly;
they move smoothly with a transition time of around one
second.
With this option, which works in a similar way to trans-
mitter control sub-trim or offset settings with other radio
control systems, it is possible to set values within the
range -99% to +99%. However, typical values are nor-
mally in single fi gures or low double fi gures.
nor mal 0% 0% 0%
¿
+2% 4% +8%
–3% –5% –7%
+2% +5% +10%
P H A S E T R I M
takeoff
speed
ther mal
AIL ELE FLA
If you have made any changes, simultaneously pressing
the
cd
or
ef
buttons of the right-hand touch-key
( CLEAR ) resets them to the default value of 0%.
Note:
In this menu you will have at least one control function
(ELE), and a maximum of three functions (ELE, AIL and
FLA), available for phase-specifi c trim settings, depend-
ing on the settings you have entered in the “Aileron /
fl ap” line of the “
Basic settings ” menu (see page 58).