manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 96 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 96

yellow

blue     

2-26

Shifting Into PARK (P)

CAUTION:

It can be dangerous to get out of your vehicle if
the shift lever is not fully in PARK (P) with the
parking brake firmly set. Your vehicle can roll. If
you have left the engine running, the vehicle can
move suddenly. You or others could be injured.
To be sure your vehicle won’t move, even when
you’re on fairly level ground, use the steps that
follow. With four

-

wheel drive if your transfer

case is in NEUTRAL (N), your vehicle will be free
to roll, even if your shift lever is in PARK (P). So,
be sure the transfer case is in a drive gear 

--

 not

in NEUTRAL (N). If you’re pulling a trailer, see
“Towing a Trailer” in the Index.

1. Hold the brake pedal down with your right foot and

set the parking brake.

2. Move the shift lever into PARK (P) position like this:

D Pull the lever toward you.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments