manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 114 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 114

yellow

blue     

2-44

The mirror also includes an eight

-

point compass display

in the upper right corner of the mirror face. When on,
the compass automatically calibrates as the vehicle 
is driven.

Mirror Operation

The right side of the switch located at the bottom of the
mirror turns the electrochromic mirror on and off. The
AUTO LED will come on when the electrochromic mirror
is turned on. To turn the mirror on, press and hold the
MIRROR button for three seconds. The mirror will darken
and remain dark until the button is released. To turn the
mirror off, press and release the MIRROR button.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments