manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 357 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 357

Scheduled Maintenance

yellow

blue     

7-7

Long Trip/Highway Intervals -- Gasoline Engines

Every 7,500 Miles (12 500 km): Engine Oil and Filter

Change (or every 12 months, whichever occurs first).
Chassis Lubrication (or every 12 months, whichever
occurs first). Drive Axle Service. Tire Rotation.

Every 30,000 Miles (50 000 km): Fuel Filter

Replacement. Front Wheel Bearing Repack 
(2WD only) (or at each brake relining, whichever
occurs first).

Every 50,000 Miles (83 000 km): Automatic

Transmission Service (severe conditions only).

Long Trip/Highway Intervals -- Gasoline Engines

Every 60,000 Miles (100 000 km): Engine Accessory

Drive Belt Inspection. Fuel Tank, Cap and Lines
Inspection. Exhaust Gas Recirculation System
Inspection. Evaporative Control System Inspection.

Every 100,000 Miles (166 000 km): Spark Plug Wire

Inspection. Spark Plug Replacement. Automatic
Transmission Service (normal conditions). Positive
Crankcase Ventilation (PCV) Valve Inspection.

Every 150,000 Miles (240 000 km): Cooling System

Service (or every 60 months, whichever occurs first).

These intervals only summarize maintenance services.
Be sure to follow the complete scheduled maintenance
on the following pages.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments