manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 244 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 244

yellow

blue     

5-2

Hazard Warning Flashers

Your hazard warning flashers let you warn others. They
also let police know you have a problem. Your front and
rear turn signal lamps will flash on and off.

Press the button at the top
of the steering column all
the way down to make your
front and rear turn signal
lamps flash on and off.

Your hazard warning flashers work no matter what
position your key is in, and even if the key isn’t in.

To turn off the flashers, push the button until the first
click and release.

When the hazard warning flashers are on, your turn
signals won’t work.

Other Warning Devices

If you carry reflective triangles, you can set one up at
the side of the road about 300 feet (100 m) behind 
your vehicle.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments