manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 150 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 150

yellow

blue     

2-80

Security Light

This light will come on
briefly when you turn the
key to START.

The light will stay on until the engine starts. If the light
flashes, the Passlock

R

 System has entered a tamper

mode. If the vehicle fails to start, see “Passlock” in 
the Index.

If the light comes on continuously while driving and
stays on, there may be a problem with the Passlock
System. Your vehicle will not be protected by Passlock,
and you should see your GM dealer.

Service Four-Wheel Drive Warning Light
(If Equipped)

If your vehicle is equipped with the automatic
four

-

wheel

-

drive transfer case, it has a computer which

controls the four

-

wheel

-

drive system.

This light should come on
briefly when you turn on the
ignition, as a check to show
you it is working.

The SERVICE 4WD light comes on to indicate that
there may be a problem with the automatic
four

-

wheel

-

drive system and service is required.

Malfunctions can be indicated by the system before 
any problem is apparent, which may prevent serious
damage to the vehicle. This system is also designed 
to assist your service technician in correctly diagnosing
a malfunction.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments