manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 265 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 265

yellow

blue     

5-23

If your Suburban has a jack cover, lift the tab up to
release the cover, then take it off.

To take the jack out, turn the wing nut counterclockwise
and take it and the retainer off. Take the jack and storage
box out and take the tools out of the box.

Your vehicle may have a pair of emergency gloves
secured to the jack. You can use them when changing
the tire, or during other emergency situations.
Remember to replace them with the jack, so you will
have them if needed later.

The tools you’ll be using include the jack (A), the jack
handle extension (B), jack handle (C), wheel wrench (D)
and the ratchet (E).

The jack handle extension is used if the flat tire is on the
rear of the vehicle.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments