manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 227 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 227

yellow

blue     

4-45

Using heavier suspension components to get added
durability might not change your weight ratings. Ask
your dealer to help you load your vehicle the right way.

NOTICE:

Your warranty does not cover parts or
components that fail because of overloading.

If you put things inside your vehicle 

--

 like suitcases,

tools, packages, or anything else 

--

 they go as fast as the

vehicle goes. If you have to stop or turn quickly, or if
there is a crash, they’ll keep going.

CAUTION:

Things you put inside your vehicle can strike 
and injure people in a sudden stop or turn, or in
a crash.
D Put things in the cargo area of your vehicle.

Try to spread the weight evenly.

D Never stack heavier things, like suitcases,

inside the vehicle so that some of them are
above the tops of the seats.

D Don’t leave an unsecured child restraint in

your vehicle.

D When you carry something inside the

vehicle, secure it whenever you can.

D Don’t leave a seat folded down unless you

need to.

There’s also important loading information for off

-

road

driving in this manual. See “Loading Your Vehicle for
Off

-

Road Driving” in the Index.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments