manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 356 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 356

Scheduled Maintenance

yellow

blue     

7-6

Short Trip/City Intervals -- Gasoline Engines

Every 100,000 Miles (166 000 km): Spark Plug Wire

Inspection. Spark Plug Replacement. Automatic
Transmission Service (normal conditions). Positive
Crankcase Ventilation (PCV) Valve Inspection.

Every 150,000 Miles (240 000 km): Cooling System

Service (or every 60 months, whichever occurs first).

These intervals only summarize maintenance services.
Be sure to follow the complete scheduled maintenance
on the following pages.

Long Trip/Highway Definition -- Gasoline Engines

Follow this scheduled maintenance only if none of 
the conditions from the Short Trip/City Scheduled
Maintenance is true. Do not use this schedule if the
vehicle is used for trailer towing, driven in a dusty area
or used off paved roads. Use the Short Trip/City
schedule for these conditions.

Driving a vehicle with a fully warmed engine under
highway conditions causes engine oil to break 
down slower.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments