manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 149 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 149

yellow

blue     

2-79

Oil Pressure Gage

The oil pressure gage 
shows the engine oil
pressure in psi (pounds per
square inch) when the
engine is running. Canadian
vehicles indicate pressure in
kPa (kilopascals).

Oil pressure may vary with engine speed, outside
temperature and oil viscosity, but readings above the
low pressure zone indicate the normal operating range.

A reading in the low pressure zone may be caused by a
dangerously low oil level or other problem causing low
oil pressure. Check your oil as soon as possible.

CAUTION:

Don’t keep driving if the oil pressure is low. If
you do, your engine can become so hot that it
catches fire. You or others could be burned.
Check your oil as soon as possible and have your
vehicle serviced.

NOTICE:

Damage to your engine from neglected oil
problems can be costly and is not covered by 
your warranty.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments