manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 225 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 225

yellow

blue     

4-43

Four-Wheel Drive Vehicles

CAUTION:

Shifting the transfer case into NEUTRAL (N) can
cause your vehicle to roll even if the transmission
is in PARK (P), for an automatic transmission.
You or others could be injured. Make sure the
parking brake is firmly set before you shift the
transfer case into NEUTRAL (N).

Use the following procedure to correctly tow your
vehicle on all four wheels:

1. Firmly set the parking brake.

2. Place the transmission in PARK (P).

3. Securely attach the vehicle being towed to the 

tow vehicle.

4. With the engine running, shift the transfer case to

NEUTRAL (N). See “Four

-

Wheel Drive” in the

Index for the proper procedure to select the neutral
position for your vehicle.

5. Release the parking brake only after the vehicle

being towed is firmly attached to the towing vehicle.

6. Turn the ignition to OFF. The OFF position unlocks

the steering column and reduces battery drain.
Unlocking the steering column will allow the proper
movement of the front wheels and tires during towing.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments