GMC 1999 Suburban Owner'S Manual Download Page 113

Page: 113 / 424

yellow

blue

2-43

Reading Lamps

If your vehicle has reading
lamps, press the button
next to the lamp to turn the
lamp on.

The lamps can be adjusted
to point in the direction
you want.

Press the button again to
turn the lamp off.

If your vehicle has an overhead console with reading
lamps, press the button next to the lamp to turn the
lamp on.

The lamps can be adjusted to point in the direction
you want.

Press the button again to turn the lamp off.

Mirrors

Inside Day/Night Rearview Mirror

Pull the tab under the mirror to reduce glare from
headlamps behind you after dark. Push the tab forward
for normal daytime operation.

Electrochromic Inside Rearview Mirror
with Compass (If Equipped)

Your vehicle may have an electrochromic inside
rearview mirror.

When on, an electrochromic mirror automatically dims
to the proper level to minimize glare from lights behind
you after dark.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Search results

Summary of Contents for 1999 Suburban

Reviews:

GMC 1999 Suburban, Owner'S Manual, Page: 113 / 424

Search results

Summary of Contents for 1999 Suburban

Reviews: