manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 272 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 272

yellow

blue     

5-30

10. Tighten the nuts firmly in a crisscross sequence as

shown. Rotate the wheel wrench clockwise.

CAUTION:

Incorrect wheel nuts or improperly tightened
wheel nuts can cause the wheel to become loose
and even come off. This could lead to an accident.
Be sure to use the correct wheel nuts. If you have
to replace them, be sure to get new GM original
equipment wheel nuts.

Stop somewhere as soon as you can and have the
nuts tightened with a torque wrench to the
proper torque. For proper torque, see
“Capacities and Specifications” in the Index.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments