manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 292 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 292

yellow

blue     

6-12

Engine Oil (Gasoline Engine)

If your vehicle has a diesel engine, see “Engine Oil
(Diesel Engine)” in the Diesel Engine Supplement.

It’s a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground.

The engine oil dipstick has a yellow ring handle and is
located on the passenger’s side of the engine.

Turn off the engine and give the oil a few minutes to
drain back into the oil pan. If you don’t, the oil dipstick
might not show the actual level.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments