manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 294 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 294

yellow

blue     

6-14

What Kind of Engine Oil to Use

Oils recommended for your vehicle can be identified by
looking for the “Starburst” symbol. This symbol
indicates that the oil has been certified by the American
Petroleum Institute (API). Do not use any oil which
does not carry this Starburst symbol.

If you change your own oil,
be sure you use oil that has
the Starburst symbol on the
front of the oil container.

If you have your oil changed for you, be sure the oil put
into your engine is American Petroleum Institute
certified for gasoline engines.

You should also use the proper viscosity oil for your
vehicle, as shown in the following chart:

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments