manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 151 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 151

yellow

blue     

2-81

Daytime Running Lamps (DRL) 
Indicator Light

This light will go on
whenever the DRL are on.

When it begins to get dark, the DRL indicator light is a
reminder to turn on your headlamps.

Check Gages Light

This light will come on
briefly when you are
starting the engine.

If the light comes on and stays on while you are driving,
it could indicate a problem with your vehicle. It could be

a problem with your oil pressure, coolant temperature,
or some other problem. Check your various gages to see
if they are in the warning zones. If they are, have your
vehicle serviced right away.

Headlamp High-Beam Indicator Light

The high

-

beam indicator is

on whenever you use your
high

-

beam headlamps. For

more details about high
beams, see “Headlamp
High/Low

-

Beam Changer”

earlier in this section.

Turn Signal and Lane Change 
Indicator Lights

The signal indicator will
come on whenever you
signal a turn or lane change.
See “Turn Signal and Lane
Change Indicator” earlier in
this section.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments