manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 321 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 321

yellow

blue     

6-41

Center High-Mounted Stoplamp (CHMSL)

The individual bulbs in the CHMSL are not replaceable.
See your dealer for assistance.

Rear Lamps

1. Open the tailgate or rear doors.

2. Remove the two black plastic plugs from the rear

lamp assembly access holes.

3. Remove the two rear

lamp assembly screws
inside the fender and
pull out the lamp
assembly. You may want
to use a magnetic
screwdriver when
removing the screws.

4. Remove the screws from

the bulb retainer and
take the bulb retainer off
of the lamp assembly.

5. Pull the old bulb straight out of the socket.

6. Put in a new bulb and push it straight in until it is

tight.

7. Replace the bulb retainer.

8. Replace the rear lamp assembly and tighten the

screws. You may want to use a magnetic screwdriver
when installing the screws.

9. Close the tailgate or rear doors.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments