manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 226 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 226

yellow

blue     

4-44

Loading Your Vehicle

The Certification/Tire label is found on the rear edge of
the driver’s door.

The label shows the size of your original tires and the
inflation pressures needed to obtain the gross weight
capacity of your vehicle. This is called the GVWR
(Gross Vehicle Weight Rating). The GVWR includes the
weight of the vehicle, all occupants, fuel and cargo.

The Certification/Tire label also tells you the maximum
weights for the front and rear axles, called Gross Axle
Weight Rating (GAWR). To find out the actual loads on
your front and rear axles, you need to go to a weigh
station and weigh your vehicle. Your dealer can help
you with this. Be sure to spread out your load equally on
both sides of the centerline.

Never exceed the GVWR for your vehicle, or the
GAWR for either the front or rear axle.

And, if you do have a heavy load, you should spread 
it out.

CAUTION:

Do not load your vehicle any heavier than the
GVWR, or either the maximum front or rear
GAWR. If you do, parts on your vehicle can
break, and it can change the way your vehicle
handles. These could cause you to lose control
and crash. Also, overloading can shorten the life
of your vehicle.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments