manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 12 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 12

yellow

blue     

1-6

Head Restraints

Slide the head restraint up or down so that the top of the
restraint is closest to the top of your ears. This position
reduces the chance of a neck injury in a crash.

Seatback Latches (2-Door Utility)

CAUTION:

If the seatback isn’t locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.

The front seatback folds forward to let you access the
rear of the vehicle.

To fold a seatback forward,
pull this lever forward and
tilt the seatback forward.

To return the seatback to the upright position, just push
the seatback rearward until it latches.

After returning the seatback to its upright position, pull
the seatback forward to make sure it is locked.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments