manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 137 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 137

yellow

blue     

2-67

To determine if your garage door opener has this
“rolling code” feature, press the appropriate button on
the universal transmitter that was programmed. If the
red light flashes rapidly for one to two seconds, then
turns solid, your garage door opener has this feature.

To program a garage door opener with the rolling code
feature, do the following:

1. Program your hand

-

held transmitter to the universal

transmitter by following the steps provided under
“Programming the Transmitter” earlier in 
this section.

2. Remove the cover panel from the garage door 

opener receiver. It is located near the garage door
opener motor.

3. Locate the training button on the garage door opener

receiver. The exact location and color will vary
among brands.

4. Press the training button on the garage door opener

receiver for one to two seconds.

5. Return to your vehicle and press the programmed

button on the universal transmitter until the red light
flashes rapidly (about two seconds).

6. Release the button, then press it again to confirm 

that it was programmed to the garage door 
opener receiver.

You may now use either the universal transmitter or the
hand

-

held transmitter to open your garage door. If you

still have difficulty in programming and require
assistance, please call 1

-

800

-

355

-

3515.

Accessories

Accessories for the universal transmitter are available
from the manufacturer of the unit. If you would like
additional information, please call 1

-

800

-

355

-

3515.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments