manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 63 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 63

yellow

blue     

1-57

4. Buckle the belt. Make sure the release button is

positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

5. To tighten the belt, pull its free end while you push

down on the child restraint. If you’re using a
forward

-

facing child restraint, you may find it

helpful to use your knee to push down on the child
restraint as you tighten the belt.

6. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s
safety belt. It will be ready to work for an adult or larger
child passenger.

Securing a Child Restraint in the Right
Front Seat Position

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments