manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 268 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 268

yellow

blue     

5-26

Removing the Flat Tire and Installing the
Spare Tire

1. Use the ratchet and

wheel wrench to loosen
all the wheel nuts. Turn
the wheel wrench
counterclockwise, with
DOWN facing you, to
loosen the wheel nuts.
Don’t remove the wheel
nuts yet.

2. If the flat tire is on the rear of the vehicle, put the

jack handle extension on the jack handle.

3. Position the jack under the vehicle. If the flat tire is

on the front of the vehicle, position the jack on the
frame behind the flat tire. If the flat tire is on the rear
of the vehicle, position the jack on the axle near the
flat tire between the spring and the shock absorber.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments