manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 62 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 62

yellow

blue     

1-56

Securing a Child Restraint in a Center 
Seat Position

You’ll be using the lap belt. Be sure to follow the
instructions that came with the child restraint. Secure the
child in the child restraint when and as the instructions say.

See the earlier part about the top strap if the child
restraint has one.

1. Make the belt as long as possible by tilting the latch

plate and pulling it along the belt.

2. Put the restraint on the seat.

3. Run the vehicle’s safety belt through or around the

restraint. The child restraint instructions will show
you how.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments