manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 264 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 264

yellow

blue     

5-22

If your two

-

door utility

model has a jack cover, 
turn the wing nut
counterclockwise and 
take the cover off.

To take the jack out, turn the wing nut counterclockwise
and take it and the retainer off. Take the jack and storage
box out and take the tools out of the box.

Your vehicle may have a pair of emergency gloves
secured to the jack. You can use them when changing
the tire, or during other emergency situations.
Remember to replace them with the jack, so you will
have them if needed later.

To open the jack cover on four

-

door utility models, turn

the wing nut counterclockwise and take the cover off.

To take the jack out, turn the wing

-

head bolt

counterclockwise and take it and the retainer off. Take
the jack and storage box out and take the tools out of 
the box.

Your vehicle may have a pair of emergency gloves
secured to the jack. You can use them when changing
the tire, or during other emergency situations.
Remember to replace them with the jack, so you will
have them if needed later.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments