manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 315 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 315

yellow

blue     

6-35

CAUTION:

Batteries have acid that can burn you and gas
that can explode. You can be badly hurt if you
aren’t careful. See “Jump Starting” in the Index
for tips on working around a battery without
getting hurt.

Contact your dealer to learn how to prepare your vehicle
for longer storage periods.

Also, for your audio system, see “Theft

-

Deterrent

Feature” in the Index.

Bulb Replacement

Before you replace any bulbs, be sure that all the lamps
are off and the engine isn’t running. For the proper bulb
type, see “Replacement Bulbs” in the Index.

For any bulb changing procedure not listed in this
section, contact your GM dealer’s service department.

Halogen Bulbs

CAUTION:

Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments