manualshive.com logo in svg

GMC 1999 Suburban, Owner'S Manual, Page: 276 / 424

Share
Download
GMC 1999 Suburban Owner'S Manual Download Page 276

yellow

blue     

5-34

Store the flat tire in the cargo area of two

-

door utility

and Suburban models and secure it to the tire carrier. To
store the flat tire:

1. Put the cover back on the tire if your vehicle has one.

2. Put the flat tire in the cargo area of the vehicle, over

the retainer bolt.

3. Slide the adapter onto the bolt in the proper location

for your model and put the wing nut on.

4. Turn the wing nut clockwise until the adapter is tight

and secure against the wheel.

5. Close the tire cover, if you have one.

Spare Tire 

--

 2

-

Door Utility Model

1. Carrier

2. J

-

Bolt

3. Adapter
4. Spare Tire
5. Nut
6. Cover

7. Pins
8. J

-

Bolt

9. Use Upper Hole and

Pin for P265 Tire or
Lower Hole and Pin
for LT245, P245 and
P235 Tires

Be sure the J

-

bolt is hooked properly for your model or

tire size as shown.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews:

No comments