background image

yellow

blue     

i

The 1999 GMC Yukon and Suburban Owner’s Manual

1

-

1

Seats and Restraint Systems

This section tells you how to use your seats and safety belts properly. It also explains the air bag system.

2

-

1

Features and Controls

This section explains how to start and operate your vehicle.

3

-

1

Comfort Controls and Audio Systems

This section tells you how to adjust the ventilation and comfort controls and how to operate your audio system.

4

-

1

Your Driving and the Road

Here you’ll find helpful information and tips about the road and how to drive under different conditions.

5

-

1

Problems on the Road

This section tells you what to do if you have a problem while driving, such as a flat tire or overheated engine, etc.

6

-

1

Service and Appearance Care

Here the manual tells you how to keep your vehicle running properly and looking good.

7

-

1

Maintenance Schedule

This section tells you when to perform vehicle maintenance and what fluids and lubricants to use.

8

-

1

Customer Assistance Information

This section tells you how to contact GMC for assistance and how to get service and owner publications. 
It also gives you information on “Reporting Safety Defects” on page 8

-

10.

9

-

1

Index

Here’s an alphabetical listing of almost every subject in this manual. You can use it to quickly find 
something you want to read.

Summary of Contents for 1999 Suburban









































































































































































































































































































































































































































Reviews: