Gestetner G060, Service Manual

Page: 972 / 1106

TECHNICAL SERVICE BULLETIN
Copyright

 

2003 RICOH Corporation. All rights reserved. Page 1 of 1
BULLETIN NUMBER: G060/G570 – 028 04/25/2003
APPLICABLE MODEL:
GESTETNER – DSC38/DSC38S
LANIER – 2138AH/2138CMF
RICOH – AP3800C/AP3800CMF
SAVIN – SLP38C/SLP38CS
SUBJECT: SC471
SYMPTOM:
An SC471, Transfer Belt Home Position service code may appear in the display.
CAUSE:
Transfer Contact Motor disconnects from bracket, causing the gear to fail. Also, when an outside force is
applied to the bracket, it may deform and the gear will separate from the bracket.
SOLUTION:
A new style DC Motor (P/N G0773706) has been released to increase the contact area with the bracket and,
the bushing inside the motor has been lengthened. To prevent the bracket from deforming, a reinforcing
section has also been added.
GENERAL:
The following part update is being issued for all G060 Parts Catalogs.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
G0603990 G0773706 DC Motor – 1.56W 1 1 59 8
UNITS AFFECTED:
All G060 printers manufactured after the serial numbers listed below will have the new style DC Motor
installed during production.
MODEL NAME SERIAL NUMBER
Gestetner DSc38
Lanier 2138
Ricoh Aficio AP3800C
Savin SLP38c
P6011200613
INTERCHANGEABILITY CHART:
0
OLD and NEW parts can be used in both OLD and
NEW machines.
2
NEW parts CAN NOT be used in OLD machines.
OLD parts can be used in OLD and NEW machines.
1
NEW parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
OLD parts CAN NOT be used in NEW machines.
NEW parts CAN NOT be used in OLD machines.
3/S
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
previously modified, use the new part numbers individually.
„
M
E
CHANI
C
AL
„
PA
R
T
S