Gestetner G060, Service Manual

Page: 579 / 1106

Copie
r
F
eat
u
re
E
x
pa
nde
r
G
570
COPY SP MODE
SM 5-41 G570
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Memory Clear 1]
1 All module Resets all the controller and engine settings to
their defaults and the counters to 0. DFU
2 ENG All Clears all the engine settings and counters. DFU
3 SCS / SRM Initializes the system settings.
5 MCS Not used.
6 Copy Memory Clr? Initializes the copy application settings.
7 Fax Initializes the fax application settings.
8 Printer application Initializes the printer application settings.
9 Scanner application Initializes the scanner application settings.
10 Network application Deletes the network file application management
files and thumbnails, and initializes the job login
ID.
11 NCS Initializes the system defaults and interface
settings (IP addresses also), SmartNetMonitor for
Admin, WebStatusMonitor settings, and the
TELNET settings.
12 IPU Clears the IPU settings
801
13 R-FAX
#
Initializes the job login ID, SmartNetMonitor for
Admin, job history, and local storage file numbers.
[Engine Free Run] 802
1 Engine Free Run Performs a free run on the printer engine.
NOTE:
•
The machine starts free run in the same
condition as the sequence of A4/LT printing
from the 1st tray. Therefore, paper should be
loaded in the 1st tray, but paper is not fed.
•
The main switch has to be turned off and on
after using the free run mode for a test.
803
[Input Check]
See section 5-4-2.
804
[Output Check]
See section 5-4-3.
[Destination] Destination Code Display
808
1 Destination *BCU Displays the destination code.
[SC Detection ON/OFF] 809
1 SC ON/OFF *BCU Enable or disables the service call detection (SC
codes will be ignored if disabling this SP mode).
[ 0 or 1 / 0 / - ] Alphanumeric
0: Enable
1: Disable
[SC Reset] 810
1 SC Reset *BCU Resets a type A service call condition.
NOTE: Turn the main switch off and on after
resetting the SC code.
[Machine Serial No.] Machine Serial Number Display 811
2 Serial Number Display *BCU Displays the machine serial number.
[FAX TEL No.] 812
1 Telephone *
CTL
Sets the telephone number for a service
representative. This number is printed on the
Counter List, which can be printed with the user’s
“Counter” menu.
This can be up to 20 characters (both numbers
and alphabetic characters can be input).