Gestetner G060, Service Manual

Page: 375 / 1106

JAM DETECTION
SM 11-13 G565
G
565
Tw
o T
ra
y
Finis
h
e
r
2. TROUBLESHOOTING
2.1 JAM DETECTION
Mode
Shift 1 Shift 2 Staple
Jam Content
9 9 9
Entrance sensor:
no detection After the exit sensor in the main machine
went off, the entrance sensor did not switch
on for at least 2 s.
9 9 9
Entrance sensor:
no detection After the entrance sensor switched on, it did
not remain on for at least 150 ms.
1
9
Upper exit sensor:
no detection After the entrance sensor switched on, the
upper exit sensor did not remain on for at
least 59 pulses.
2
9
Upper exit sensor:
jam After the upper exit sensor switched on, it
did not switch off within 150 ms.
1
9
Lower exit sensor:
no detection After the entrance sensor switched on, the
lower exit sensor did not switch on within 59
pulses.
2
9
Lower exit sensor:
jam After the lower exit sensor switched on, it
did not switch off within 150 ms.
1
9
Stapler tray
entrance sensor:
no detection After the entrance sensor switched off, the
stapler tray entrance sensor did not switch
on within 102 pulses.*
2
9
Stapler tray
entrance sensor:
jam After the stapler tray entrance sensor
switched on, it did not switch off within 59
pulses.*
1
9
Lower tray exit
sensor: no
detection After the transport motor switched on, the
lower tray exit sensor did not switch on
within 1260 ms.
*1
: Timing for A4 L (differs according to paper size).
*2
: Counted by entrance motor pulses because timing differs for feed out.