Gestetner G060, Service Manual

Page: 749 / 1106

F
ax Un
it
G
307
BIT SWITCHES
SM 3-25 G307
Scanner Switch 0D SP No. 1-102-014
No FUNCTION COMMENTS
0-6 Not used Do not change the settings.
7
Scan width for A5 lengthwise or
B5 lengthwise originals
0: 210 mm (8.5”)
1: Original width
0: The machine scans the original as 210 mm (8.5")
width. The transmitted image has a blank area on
the right.
1: The machine scans 148 mm (A5) or 182 mm (B5)
and centers the scanned data on a 216 mm width
transmitted image.
Scanner Switch 0E SP No. 1-102-015
No FUNCTION COMMENTS
0 Wait time for the next page
when scanning a book original
into memory
0: 60 s
1: 30 s This bit determines how long the machine waits for
the next page when scanning a book original for
memory transmission. If this timer expires, the
machine transmits all the pages scanned so far as
one document.
Note: In immediate tx or parallel memory tx, the wait
time for the next page is 10 s.
1
Scan resolution unit
0: mm
1: inches This bit determines which resolution unit will be
used for scanning a fax message.
Default setting: mm
2 ADF jam alarm display time
0: 60 s
1: 30 s The bit is only effective when bit 0 of scanner bit
switch 0C is “0”.
This bit determines how long the machine displays
the ADF jam alarm after a jam occurred.
3-7 Not used Do not change the settings.
Scanner Switch 0F SP No. 1-102-016
No FUNCTION COMMENTS
0
Image rotation before
transmission (A4/LT sideways)
0: Disabled
1: Enabled This bit determines whether the machine rotates the
scanned image by 90 degrees before transmission.
If this bit is set at 1, A4 (LT) sideways images (297
mm width in the protocol) will be transmitted as A4
(LT) lengthwise images (216 mm width in the
protocol).
1
Not used Do not change the settings
2 Image rotation before
transmission (A5/HLT
lengthwise)
0: Disabled
1: Enabled This bit determines whether the machine rotates the
scanned image by 90 degrees before transmission.
If this bit is set at “1”, A5 (HLT) lengthwise images
will be transmitted as A4 (LT) width images (216
mm width in the protocol).
3-7
Not used Do not change the settings.