Gestetner G060, Service Manual

Page: 147 / 1106

SC TABLE
SM 4-33 G060
SC No. Item Definition Possible Cause
Related
SCs
Troubleshooting Procedure Type
SC 863 HDD: Read
error The data stored in the HDD
cannot be read correctly. •
Defective HDD
•
Defective controller
1. Turn the main switch off and on.
2. Replace the HDD.
3. Replace the controller. CTL
SC 864 HDD: CRC
error While reading data from the
HDD or storing data in the
HDD, data transmission fails.
•
Defective HDD 1. Turn the main switch off and on.
2. Replace the HDD. CTL
SC 865 HDD: Access
error An error is detected while
operating the HDD.
•
Defective HDD
1. Turn the main switch off and on.
2. Replace the HDD. CTL
SC 900 Electric
counter error Abnormal data is stored in the
counters.
•
Defective NVRAM
•
Defective controller
1. Turn the main switch off and on.
2. Check the connection between the
NVRAM and controller.
3. Replace the NVRAM.
4. Replace the controller.
CTL
SC 990 Software
performance
error The software makes an
unexpected operation.
•
Defective software
•
Defective controller
•
Software error
1. Turn the main switch off and on.
2. Reinstall the controller and/or engine
main firmware.
3. See NOTE 1 at the end of the SC
table .
CTL
SC 991 Software
Performance
Error - Logged The software performs an
unexpected operation.
Note: Unlike SC990, the
software/machine continue to
function without requiring any
action.
•
Incorrect program
argument or other
parameter
•
Insufficient working
memory
This SC is not displayed on the LCD
(logged only). CTL
SC 998 Application
start error No applications start within 60
seconds after the power is
turned on.
•
Loose connection of
RAM-DIMM, ROM-
DIMM
•
Defective controller
•
Software problem
1. Turn the main switch off and on.
2. Check if the RAM-DIMM and ROM-
DIMM are properly connected.
3. Reinstall the controller system
firmware.
4. Replace the controller.
CTL
SC 999 Firmware error See G570 SM page 4-43 for description of SC 999
Rev. 09/2003
⇒