Gestetner G060, Service Manual

Page: 525 / 1106

SC TABLE
SM 4-43 G570
SC 991 Software
Performance
Error - Logged The software performs an
unexpected operation.
Note: Unlike SC990, the
software/machine continue
to function without requiring
any action.
•
Incorrect program
argument or other
parameter
•
Insufficient working
memory
This SC is not displayed on the LCD
(logged only). B
SC 997
(CF)
Application
function selection
error •
The application selected
by the operation panel
key does not start or ends
abnormally.
•
Software (including
the software
configuration)
defective
•
An option required by
the application (RAM,
DIMM, board) is not
installed
SC 998 1. Check the devices necessary for the
application program. If necessary
devices have not been installed,
install them.
2. Check that application programs are
correctly configured.
3. Take necessary countermeasures
specific to the application program. If
the logs can be displayed on the
operation panel, see the logs.
B
SC 998 Application start
error No applications start within
60 seconds after the power
is turned on. •
Loose connection of
RAM-DIMM, ROM-
DIMM
•
Defective controller
•
Software problem
1. Turn the main switch off and on.
2. Check if the RAM-DIMM and ROM-
DIMM are properly connected.
3. Reinstall the controller system
firmware.
4. Replace the controller.
B
⇒
Rev. 09/2003