Gestetner G060, Service Manual

Page: 742 / 1106

BIT SWITCHES
G307 3-18 SM
System Switch 16 SP No. 1-101-023
No FUNCTION COMMENTS
0 Parallel Broadcasting
0 : Disabled
1 : Enabled
1: When the G4 or/and G3 unit is installed, the
machine sends messages simultaneously using
both available ports (PSTN/ISDN) during
broadcasting.
1 Priority setting for the G3 line.
0 : PSTN-1 > PSTN-2
1 : PSTN-2 > PSTN-1
This function allows the user to select the default G3
line type. The optional SG3 unit is required to use
the PSTN-2 setting.
2 Changing the I-G3 modem
default.
0 : PSTN-1
1 : PSTN-2
This function allows the user to select the default I-
G3 modem. The optional SG3 unit and ISDN unit
are required to use the PSTN-2 setting.
3 Line used for I-G3
transmissions
0 : Allowed to change
1 : Fixed
0 : The machine will place priority on the line
selected by the above bit 2 for I-G3
transmissions.
1 : The machine will always use the line selected by
the above bit 2 for I-G3 transmissions.
4-7 Not used Do not change the settings.
System Switch 17 - Not used (do not change the settings)
System Switch 18 - Not used (do not change the settings)
System Switch 19 SP No. 1-101-026
No FUNCTION COMMENTS
0-3 Not used Do not change the settings.
4
Number of jobs controlled for
PC-FAX TX
0: 64 Jobs
1: No limitations (But
conforms to device limitations)
Sets the number of jobs controlled for PC-FAX
transactions. If “1” is selected (no limitations), control
is relinquished to the device (standard 400,
expandable to 800).
5 Not used Do not change the settings.
6 Extended scanner page
memory after memory option
is installed
0: Disabled
1: Enabled
0: After installing the memory expansion option, the
scanner page memory is extended to 4 MB from 2
MB.
1: If this bit is set to 1 after installing the memory
expansion option, the scanner page memory is
extended to 12 MB. But the SAF memory
decreases to 18 MB.
7 Special Original mode
0: Disabled
1: Enabled
1: If the customer frequently wishes to transmit a form
or letterhead which has a colored or printed
background, change this bit to “1”. “Original 1” and
“Original 2” can be selected in addition to the
“Text”, “Text/Photo” and “Photo” modes.
System Switch 1A - Not used (do not change the settings)
System Switch 1B - Not used (do not change the settings)
System Switch 1C - Not used (do not change the settings)
⇒
Rev. 11/2003