Gestetner G060, Service Manual

Page: 581 / 1106

Copie
r
F
eat
u
re
E
x
pa
nde
r
G
570
COPY SP MODE
SM 5-43 G570
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
39 Apple Talk Type Sets the AppleTalk type for the network.
40 Working Zone: AT Sets the AppleTalk working zone for the network.
47 Job Analysis Timeout Sets the Centronics job analysis timeout for the
network.
[ 0 to 4200 / 3 / 1 sec/step ]
48 Job Timeout Sets the Centronics job timeout for the network.
[ 0 to 4200 / 0 / 1 sec/step ]
49 Noise Cancel Sets the noise cancel level for the network.
[ 4 to 7 / 4 / 1 clock/step ]
50 1284 Compatibility Switches Centronics IEEE1284 compatibility on/off
for the network.
[ 0 or 1 / 1 / - ]
0: Disabled, 1: Enabled
Selecting “0” disables bi-directional data
transmission.
51 Data Transfer Sets the Centronics transfer speed for the
network.
[ 0 or 1 / 1 / - ]
0: Slow, 1: Fast
If you select “0” there will be a 120
µ
s delay from
the STP signal to the data transfer. (With 1: Fast
there is no delay.)
52 ECP Switches the ECP setting for Centronics off/on.
[ 0 or 1 / 1 / - ]
0: Disabled, 1: Enabled
With “1” selected, SP5-828-050 must be enabled
for 1284 mode compatibility.
828
53 Transmission Speed
*
CTL
Selects the Ethernet transmission speed.
[ 0 to 3 / 0 / 1 /step]
0: Auto
1: 10Base-T
2: 100Base-TX
3: Auto
[Initial Setting Clear] 831
1 Initial Setting Clear Clears the system settings, except for the timer
and user code settings.
[HDD Init.] HDD Initialization
1 All
2 IMF
3 NFA
4 Job Log
5 Printer Fonts
Initializes the hard disk (the entire disk, or by
partitions). Use this SP mode only when there is a
hard disk error.
832
9 Debug
#
DFU
[JobLog ON/OFF]
833
7 JobLog ON/OFF *
CTL
Saves the result of the jobs in the job log. If this
mode is enabled, the result is written on the HDD.
If no HDD is installed, this feature is disabled even
if this SP is set to ‘enabled’.
[ 0 or 1 / 0 / - ]
0: Disabled
1: Enabled